Transformer trough | automatic drainage system 4.0 Customer Case Transformer trays Transformer trays of transformers Ua1, Ua2 and Ua3, Dortmund substation, Germany. Insulating liquid: mineral oil Destination Use of an automatic drainage system for transformer trays with 5 ppm as the tested measured value for the oil [...]

Transformer tray | automatic drainage of rainwater - tested and safe Customer Case Transformer tray 110 kV outdoor switchgear Neuhof substation. The Neuhof substation is a reference project for the future design and equipment of transformer stations. Challenge One of the customer's objectives is to reduce the [...]

Hydraulic oil care | Pontoon excavator LIEBHERR P955 Litronic Customer case System — Pontoon excavator Liebherr pontoon excavator P 995 Litronic Oil type: Biohydraulic oil (HEES) ISO VG 46 Volume: 6,400 litres Challenge Due to the operating conditions the risk of dirt and water ingress is always [...]

Hydraulic Oil Care in the Offline Flow, Winch | Tug Bot Customer Case Hydraulic system, winch Vessel: Tug boat "BEAUFORT", 2010 built by Damen shipyard in the Netherlands Hydraulic oil: Shell Tellus 46 Oil volume: 1.200 Litres Challenge High temperatures put an extreme strain on the hydraulic [...]

Lube Oil Filtration for 4-Stroke Diesel Engines | Chemical Tanker Customer case Marine Diesel Engines Vessel: Chemical tanker, 19,800 GT Engines: 4-stroke diesel engines MAN L23/30H, 800/960 kW (3 pieces) Lube oil: Chevron TARO 30 DP30 Fuel: HFO RMG < 380 cSt, Sulphur: < 3.5% [...]

Lube Oil Care 4-Stroke Diesel Engines | Container Vessel Customer case Marine Diesel Engines Vessel: Container vessel, 4,200 TEU Engines: MaK 6M332, 2,880 kW/600 rpm Running hours: 5,300 RHs/year Load: Ø 60% part load, long periods with < 30% Lube oil: 2,250 Litres of SHELL ARGINA X 40 (0.8 [...]

Lube Oil Care Marine Diesel Engines (4-stroke) | Supply Vessel Customer case Marine Diesel Engines Vessel: Supply Vessel Engines: BERGEN, 2,500 kW/750 rpm (2 pieces), 4-stroke diesel engines Lube Oil: SHELL GADINIA AL 40 Test — Centrifuge vs CJC® Lube Oil Filter Test period: > 10,000 running [...]

Lube Oil Filtration, Main Engine, Diesel Electric Propulsion | Ferry Customer case System — Marine Diesel Engine Vessel: Ferry M/F "TYCHO BRAHE" Main engine: 3 engines type Wärtsilä 6R32 + 1 type 6R32 (LNE), each with 3,000 kW Fuel: MDO, ULSD (ECA operation) Lube Oil: Castrol MHP 154 Oil [...]

Lubricant Care in 4-Stroke Dual-Fuel Engine | Passenger Vessel, Ferry Customer case System — Dual-Fuel Engine Vessel: Passenger Vessel, ferry M/F "PRINSESSE ISABELLA" Main engine: 4-stroke dual-fuel engine, type Wärtsila 6L20DF (1050 kW) Lubricant: Texaco HDAX 5200 Oil volume: 375 Litres Fuel: MGO, LNG, dual-fuel Passenger [...]

Gear Oil Maintenance, Thruster | Harbour Tug Customer case System — Thruster Vessel: Harbour tug "VB PORNIC" Thruster: AQUAMASTER US 1401 AZIMUTH Starboard Thruster Gear oil: EPONA Z 100 (marine mineral gear oil) Viscosity: 100.7 cSt @ 40 °C Oil volume: 850 litres Challenge Entry of seawater [...]

Gear Oil Care, Thruster | Tug Customer case System — Thruster Vessel: Tug "BUGSIER-4" Thruster: Wärtsila LCT CS225-B/WN-K 1,600 kW at 1,000 rpm Gear oil: Shell Omala S2 GX 150 Classification: CLP DIN 51517-3 Oil volume: 1,500 litres Engine running time: approx. 17,315 operating hours (RHS) at the start [...]

Engine Oil Care, Marine 4-Stroke Diesel engine | Cargo Ship Customer case Marine Diesel Engines Ship: Cargo ship "MV EIDSVAAG VEGA" Engine: Main engine MaK 8M20, Marine 4-stroke diesel engine, 1,520 kW Lubricating oil: 900—1,000 liters engine lubricating oil Marway 1040 Challenge The engine lubricating oil was [...]

Hydraulic Oil Care | Sand-Lime Brick Press Customer case System Sand-lime brick press type 1200 J Manufacturer: Dorstener Maschinenfabrik Oil volume / type: approx. 3,800 Litres, SRS Wiolan HLP-D 46 Challenge During the processing of the sand-lime bricks, large quantities of extremely fine particles are produced, which [...]

Lube oil treatment on 2-stroke diesel engines | container vessels Customer case System — Marine Diesel Engines Vessels: Container vessels CMS "HONG KONG EXPRESS" and CMS "HAMBURG EXPRESS", each 13.177 TEU Main engines: 2-stroke diesel engines type MAN 11K98 ME MK 7.1 (derated to 45,100 kW at 84 rpm [...]

Gas Engine Oil Filtration, Biogas Engine CATERPILLAR 3516, Combined Heat and Power Plant CHP Customer case Biogas engine Engine type: CATERPILLAR 3516 (1,200 kWe) Oil volume: approx. 450 litres Engine oil: Mobil Pegasus 905 Fuel: Biogas Engine hours: approx. 57,000 hours Challenge Short oil change intervals. The [...]

Gas engine oil care, biogas engine MAN 2842, combined heat and power plant CHP Customer case Biogas engine Engine type: MAN 2842 (300 kWe) Oil volume: approx. 60 litres Engine oil: Mobil Pegasus 710 Fuel: Biogas Engine hours: approx. 56,000 hours Challenge Short oil change intervals. The [...]

Hydraulic oil care in hydrostatic systems — Oil drying after entry of coolants Customer case Hydrostatic systems Hydrostatic systems several machining centers in the production of slewing bearings and in drive technology. Turning, drilling and milling machines for the production of large parts, bearings and drive parts up to [...]