Reduce the water content in the oil to < 100 ppm — within the shortest time

Desorber D30 from CJC®: Your solution for dewatering oils

Desorber D30, reduce water content in oil, oil dehumidification

Desorber D30 – Reduce water content in oil

Desorbers D30 from CJC® minimize the water content in the oil within a very short time – whether hydraulic oil, gear oil, lubricating oil, processing oil, leakage oil or quenching oil, and whether mineral oil or synthetic fluids. Due to the installation in a separate off-line circuit or at a free-standing tank, oil dehumidification is carried out continuously and independently of the operation of your machine. The CJC® Desorber D30 removes free, emulsified and dissolved water and reduces the water content in the oil to < 100 ppm — even oils that poorly separate water and form stable emulsions. Oil dehumidification by desorption is also ideal for oils with high viscosity and air content. It does not affect the additive package.

Fact is,

water in oil harms the flowability and lubricating effect of the oil. In addition, water accelerates oil ageing processes and additive consumption. The oil acidifies, and sludge and resin-like deposits arise in the oil system and tank. Wear, corrosion, cavitation, and the increased risk of foam endanger the oil-lubricated components. Water is also the perfect basis for bacteria, yeasts and fungi that spread and make tank cleaning difficult (health protection). All these factors shorten the service life of oil, components and machine.

Since even dissolved water in the oil can be released due to temperature and pressure fluctuations and is then initially emulsified, i.e. finely distributed in the oil, it is best practice to keep oils and fluids as dry as possible. Emulsified water is the most harmful water-in-oil state, as it circulates with the oil and unfolds its negative influences everywhere in the oil system.

Water in the oil is the second most common cause of failures and disturbances in an oil system.

Application areas & installation example Desorber D30

Especially in the paper, steel, plastics and metal processing industries, as well as in maritime applications, there is a high risk of water entry into the oil systems due to environmental and process conditions.

Installation principle desorber D30, reduce water content in the oil, oil dehumidification

The pump in the oil inlet of the desorber D30 sucks in the oil. In the desorber chamber, the warm, moist oil meets a counterflow of cold, dry air. The oil heats the cold air, which allows it to absorb a lot of moisture from the oil (system pressure constantly low < 2 bar). In a subsequent process, the warm, moist air cools down again, and the water condenses.

  • Hydraulic and hydrostatic systems
  • Gearboxes and lubricating oil systems
  • Oil recovering:
    • Machining oil
    • Leakage oil
    • Quenching oil
  • Mineral oil
  • Bio oil / environmentally acceptable lubricants
  • Ester
  • PAG (Poly Alpha Glycol)
  • PAO (Poly Alpha Olefin)
  • other synthetic fluids

Features — Desorber D30

Desorber D30, reduce water content in oil, oil dehumidification

Oil volume, dimensioning e.g.: 5,000 Litres

Installation: flexible, e.g. in the off-line circuit or on a free-standing tank

Viscosity range: up to ISO VG 320

Water content in the oil, max.: 700,000 ppm (70%)

Water separation: water content permanently < 100 ppm (0.01%)

Supply voltage: 3 x 400/50—60 Hz or 3 x 440/480/575 V/60 Hz

Power consumption: 3.6 kW

Current: 13.5 A

Conveying capacity (24/7): 250 Litres per hour

System pressure (suction side), max.: 0.5 bar

Weight, ca: 318 kg

Dimensions, L x W x H: 900 x 740 x 1,650 mm

Equipment:

Standard:

  • Pump with motor
  • electrical control with an integrated alarm system
  • Leakage monitoring
  • Oil sampling point
  • automatic water separation

Optional:

  • Air, water or coolant cooling

Download product data sheet:

All sizes and variants — without and with depth filter

Desorber, oil drying

That say our customers

Hydrostatische Systeme

“I am completely satisfied with the investment. Oil drying takes place very quickly and without machine downtime. Thus, we keep the production stable, have time to look for the failure cause, avoid the oil change and waste oil disposal, and maintain the oil quality.”

Read customer case

Head of Maintenance, Liebherr Components
Automobilhersteller

The Desorber works excellently in this application. I was impressed by the results and surprised how efficiently the Desorber dewatered the oil. The Desorber is easy to operate and is low-maintenance.”

Read customer case

Engineer, Quenching plant
gear oil maintenance, thruster, harbour tug

The CJC® Desorber allows us to operate the tug boat until the regular inspection in the dry dock in 6 months. The oil analysis results speak for themselves and substantiate the efficiency of the Desorber.

Read customer case

Regional Technical Manager, Harbour tug boat „VB PORNIC“
Gear oil filtration, thrusters, harbour tug

“It was only with the Desorber that the gear oil could finally be dried satisfactorily. Without CJC®, we would have had to change the 1,500 litres of gear oil soon. By avoiding the oil change, we were able to save EUR 4,890 (EUR 3.26/litre) – an important contribution not only in terms of budget but also in terms of resource savings. The excellent results convinced us, so we decided to purchase two identical Desorbers for our tug boats, “Bugsier 5” and “Bugsier 6”.

Read customer case

Technical Superintendent, Harbour tug boat „BUGSIER-4“
mv island scout,

“The desorber is ideal for such operations because it works continuously while the vessel is at sea. The results are very satisfactory. The desorber works very well and continues to reduce the water content.”

Read customer case

Technical Inspector, Supply vessel „ISLAND SCOUT“

Write or call your regional contact person now

Let us start a conversation: about your machine, your oil, and the specific challenges. We reduce the water content in the oil, even with highly viscous oils and emulsions. Whether you use mineral oil or synthetic fluids.

Receive a personal consultation and a non-binding offer for a CJC® Desorber D30.

Write or call us.

oil samplels without and with cjc, oil dewatering, desorber
oil samplels without and with cjc, oil dewatering, desorber
oil samplels without and with cjc, oil dewatering, desorber